Tag archive for: DHT11

How to show the temperature and humidity of your room on a Heltec WiFi Kit 32 attached to a DHT11 / DHT22 sensor

When you have a DHT11 / DHT22 sensor, you can measure the temperature and humidity of your room. If you attach the sensor to a Heltec WiFi Kit 32 development board, you will be able to put up the readings on a 0.96 Inch OLED screen.

Given these points, let’s look at how we can show the temperature and humidity readings of your room on a Heltec WiFi Kit 32 development board attached to a DHTXX sensor.

How to use a ESP32 development board to read temperature and humidity from a DH11 sensor

When you have a DHT11 sensor, you will be able to get the temperature and humidity of your environment.

Given that, this post shows how to use ESP32 development board to read temperature and humidity from a DHT11 sensor.

How to read temperature and humidity from a DHT11 sensor that is connected to a Raspberry Pi 3

I had always wanted to measure the temperature and humidity of the environment where my herbs are grown at.

Since I had a few pieces of Raspberry Pi 3 lying around the house, I decided to use one of them to measure the temperature and humidity of the area of the house where my herbs are.

An additional sensor is required to measure the temperature and humidity of the environment. Therefore, I went to AliExpress and got a DHT11 sensor. By connecting a DHT11 sensor to my Raspberry Pi 3, I can give it the ability to read the temperature and humidity of its environment.

Given these points, I created this post to show how to read temperature and humidity from a DHT11 sensor that is connected to a Raspberry Pi 3.

In order for us to check the temperature and humidity from the DHT11 sensor, we will build a simple Flask application that returns the temperature and humidity values as HTTP responses to HTTP clients.