.xz<\/strong> file onto your microSD card:
\n![\"20200310](\"https:\/\/www.techcoil.com\/blog\/wp-content\/uploads\/20200310-balenaEtcher-flashing-Ubuntu-19.10-server-Raspberry-Pi-image.gif\")
<\/p>\nBooting your Ubuntu 19.10 server on your Raspberry Pi<\/h2>\n
Once the image flashing is completed, remove the microSD card from your computer and insert it into your Raspberry Pi SD card slot.<\/p>\n
After that, connect the power adapter to your Raspberry Pi and Ethernet cable to your Raspberry Pi. When you had done so, turn on the switch for the power adapter.<\/p>\n
Finding the IP address of your Raspberry Pi<\/h2>\n
When your Raspberry Pi boots with Ubuntu 19.10 server, it will get an IP address from your router. Therefore you can get the IP address of your Raspberry Pi from your router DHCP records.<\/p>\n
Alternatively, you can use a computer connected to the same network to find the IP address. Given that, start a terminal program on your computer and enter the following command:<\/p>\n
\r\nping ubuntu\r\n<\/pre>\nWhen you do so, you should find output similar to the following:<\/p>\n
\r\nPING ubuntu (192.168.1.116): 56 data bytes\r\n64 bytes from 192.168.1.116: icmp_seq=0 ttl=64 time=0.983 ms\r\n64 bytes from 192.168.1.116: icmp_seq=1 ttl=64 time=1.992 ms\r\n64 bytes from 192.168.1.116: icmp_seq=2 ttl=64 time=2.105 ms\r\n<\/pre>\nGiven this output, we can deduce that our Raspberry Pi is holding 192.168.1.116<\/strong> as the IP address to communicate in the network.<\/p>\nConnecting to your Raspberry Pi Ubuntu 19.10 server via SSH<\/h2>\n
After getting the IP address, you can then use the SSH command to get into your Ubuntu 19.10 server:<\/p>\n
\r\nssh ubuntu@192.168.1.116\r\n<\/pre>\nWhen prompted for the password, type the default password, ubuntu<\/strong>. After you had done so, your Ubuntu 19.10 server will prompt you to change your password. Therefore, enter ubuntu<\/strong> again followed by your favourite password twice<\/strong>.<\/p>\nWhen you had changed your password successfully, Ubuntu 19.10 will kick you out. Therefore, use the SSH command to get into your Ubuntu 19.10 server again:<\/p>\n
\r\nssh ubuntu@192.168.1.116\r\n<\/pre>\nUpdating your Ubuntu 19.10 server on your Raspberry Pi<\/h2>\n
If you wish to update your Ubuntu 19.10 server on your Raspberry Pi, then you can run the following commands:<\/p>\n
\r\nsudo apt-get update\r\nsudo apt-get upgrade -y\r\nsudo shutdown -r now\r\n<\/pre>\nAfter a while, SSH back to your Ubuntu 19.10 to continue with the rest of the configurations.<\/p>\n
Changing the timezone on your Ubuntu 19.10 server<\/h2>\n
If you want to change the timezone on your Ubuntu 19.10 server, there are several steps to follow.<\/p>\n
First, get the name of your timezone that Ubuntu will recognize. For example, if I want to set my timezone to Singapore<\/strong>, I can run the following command to get the name of the Singapore timezone:<\/p>\n\r\ntimedatectl list-timezones | grep Singapore\r\n<\/pre>\nWhen my Ubuntu ran that command, it returned Asia\/Singapore<\/strong> as the name. <\/p>\nGiven that, I can then set Singapore's timezone as the timezone for my Raspberry Pi with the following command:<\/p>\n
\r\nAsia\/Singapore\r\n<\/pre>\nChanging the hostname of your Ubuntu 19.10 server<\/h2>\n
When you have multiple Raspberry Pi running Ubuntu, you may want to change the hostname of your Ubuntu 19.10 server. <\/p>\n
Given that, open up \/etc\/hostname<\/code> with nano<\/code>:<\/p>\n\r\nsudo nano \/etc\/hostname\r\n<\/pre>\nWhen nano<\/code> loads up, change the contents of \/etc\/hostname<\/code> to reflect the hostname that you like to give to your Raspberry Pi.<\/p>\nAfter you had changed the contents, press Ctrl-X<\/strong>, Y<\/strong> and Enter<\/strong> to save the changes.<\/p>\nIn order to get your Ubuntu 19.10 server to take the new hostname, reboot the system with the following command:<\/p>\n
\r\nsudo shutdown -r now\r\n<\/pre>\n![\"How](\"https:\/\/www.techcoil.com\/blog\/wp-content\/uploads\/How-to-install-Ubuntu-19.10-server-on-your-Raspberry-Pi.jpg\")
<\/p>\n\n
![\"20200310](\"https:\/\/www.techcoil.com\/blog\/wp-content\/uploads\/20200310-screen-capture-of-Ubuntu-download-for-Raspberry-Pi-page.jpg\")
<\/p>\n![\"Facebook](\"\/ph\/img\/3rd-party\/social-icons\/Facebook.png\")
Share\n <\/a>\n <\/li>\n ![\"Twitter](\"\/ph\/img\/3rd-party\/social-icons\/Twitter.png\")
Tweet\n <\/a>\n <\/li>\n ![\"Linkedin](\"\/ph\/img\/3rd-party\/social-icons\/linkedin.png\")
Share\n <\/a>\n <\/li>\n ![\"Pinterest](\"\/ph\/img\/3rd-party\/social-icons\/Pinterest.png\")
Save\n <\/a>\n <\/li>\n <\/ul>\n ","protected":false},"excerpt":{"rendered":"